Download PDF

Circular Tri-Scragg Mill

Overview

If you’ve been trying to think of how you can simplify your assembly line process, we’ve just made your choice easy. The Baker Circular Tri- Scragg Mill uses a “dip-dog” drag feed with drop links every 12” to allow end-to-end feeding. After the log is sawn by two 48” circular blades, the two-sided scragg block is then fed through a horizontal band blade. Self-centering wheels center the two-sided scragg block and eliminate twisting as it passes. The horizontal band blade splits the scragg block, making it into two three-sided cants, ready to be resawn. Choose the Baker Circular Tri-Scragg Mill. It’s a combination you can’t get anywhere else.

Features

• Accepts scragg blocks 6” to16” in diameter, and 36” to60” long
• Gives a high yield of up to 75%*
•  Proven to produce up to 30,000 bf per day*
• Circular saws easily move in and out to desired width setting
• Uniframe construction
• Fully guarded
• Easy quick setup
• Totally electrical complete
• Two 48” circular blades cut with 5/16” kerf
• One 13’2” x 11/4” band blade cuts with 1/16”+ kerf
• Runs frozen wood easily
• Debarking is not necessary
• Operators control station
• High production and low maintenance
• No special floor required

*Actual recovery rate and production dictated by log diameter

• Production Rate: Up to 30,000 bf per day*
• Band Wheels: Dynamically balanced 28” solid metal wheels
• Guides: Baker’s Exclusive Flat Guide System
• Blades: Two 48” (122 cm) circular ?blades Standard (Cuts with 5/16” [8 mm] kerf)
• One 13’ 2” X 11/4” (4 m x 32 mm) band blade (Cuts with 1/16”+ [1.6 mm+] kerf)
• Band Blade Tensioning: Spring
• Sawdust Removal: One 10” dust pipe outlet handles the dust for both circular saws and one 4” outlet provided for dust removal from band headrig
• Dimensions & Weight:?Call for details
• Feed Speed: Variable
• Controls: Hydraulic
• Band Blade Height Settings: Operator controlled hydraulics
• Width Control: Standard: Two point hydraulic setworks
• Recommended CFM for Dust Removal: A minimum of 3,600 CFM for circular blades and a minimum of 600 CFM for the band blade

• Drive Motors: Two 50 HP Standard (37 kw) (Each Circular Blade) One 20 HP Standard (15 kw) (Band Blade)
• Electrical: All voltages available; Standard: 220V or 440V 3-phase 60Hz; machine completely prewired;
• Hydraulic Feedworks Power Pack: Up to 15 HP (11 kw) available 1,500 PSI sized to accommodate options
• NEMA 12 enclosure with starters, disconnects, control voltage transformer and circuit overload protectors start/stop station with
• E-stop button

• Log Diameter: 6” (152 mm ) min.16”(406 mm) max.
• Log Length: 36” min. (914 mm)?60”max. (1,524 mm)

• Sharp chain drag feed with spike links spaced every 6”(152 mm)
• Log turner/positioner
• Log infeed deck with single log loading pacman system
• Powered hold-down wheels
• Longer log lengths available to 8’max. (2.4 m) upon request
• Computer controlled setworks
• Operator’s saw cab
• Air conditioning for saw cab
• Heater for saw cab
• Complete systems
• Complementary equipment such as edgers,
• double end trims, band slab edgers, resaws,
• connecting conveyors, etc, are available.
• Log debarker and log merchandising

Product specifications are subject to change without notice.