|
Heavy-Duty Portable Board Edger 
Overview
The Baker Heavy-Duty Portable Board Edger increases your production by removing the barky edges on flitches. Concentrate on sawmilling and let the Baker Heavy-Duty Portable Board Edger worry about the bark. You can choose to edge just one or both sides of a flitch, as needed. Out comes perfectly straight boards without the barky edges.
The Baker Heavy-Duty Portable Board Edger is road ready. It comes with a standard trailer package, so it can be easily moved to your site. (the trailer package can be deleted for stationary installation). Your choice of gasoline, diesel, or electric power are available.
Features
-
Two 10” carbide-tipped split saw blades (10 teeth per blade)
- Easy, on-the-fly width of cut adjustment
- Movable rail to bypass fixed blade (when edging flitches with only one barky side)
- Width setting locks in place
- 24” rough-top power driven conveyor belt provides more positive feeding of material through machine
- Blade kerf: 3/16” (0.188”)
- Over-the-top board return rollers
- All electric starting (Pull start backup on 20 HP gasoline engine)
- Simple to operate
Specifications
-
Production Rate: Varies according to type, length, width, and thickness of material being cut
-
Blades: Two (2) 10 tooth, 10” (254 mm) diameter circular split blades
-
Infeed/Outfeed Roller Height: 32” (818 mm)
-
Feed Speed Control: Variable, 0-100 feet (0-30.48 m) per minute
-
Dimensions & Weight (with trailer package):
-
Length: 180”(4.5 m)
-
Width: 63” (1.6 m)
-
Height: 63” (1.6 m)
-
Weight: 1,800 lbs. (816 kg)
-
Roller Width: 33” (84 cm)
-
Minimum Ground Clearance 10" (254 mm)
-
Sawdust Removal: One 6” opening (1,300 CFM) for dust collectors/blowers
Power
- Motor: 20-HP Honda gasoline engine (Standard)
-
Revolutions Per Minute (RPM): 3600 maximum
-
Fuel Tank: 6 gallons (22.7 l)
-
Starter/Battery: 12 volt
-
Hydraulic Motor: Driven by main engine For electric motors, all voltages available; standard 220V or 440V 3-phase 60Hz
-
Electric models come complete with a 15 HP (11 kw) TEFC motor, control panel, starter(s), disconnect and overload protection.
Capacities
-
Maximum Flitch Width: 28” (71 cm) with Board Thickness: 1/2” min. to 2 1/4” max. (13 mm adjustable rail set at 0 or 21” (53 cm) when to 57 mm) adjustable rail is used to bypass fixed blade
-
Board Length: Minimum of 4’ (1.2 m) long Edging Cut Width: and a maximum of 24’ (7.3 m) 31/2” to 18” (86 mm to 457 mm) between blades
Options
PO Box 128 Ellington, Missouri 63638 USA
Website: www.baker-online.com E-mail: info@baker-online.com
Fax: (573) 663-2787 Phone: (573) 663-7711
|